Drum reset for Brother MFC-L2730DW
The Brother MFC-L2730DW black and white laser multifunction printer is designed with the toner and imaging drum as separate parts. The idea is that the drum unit does not have to be replaced as much as the toner.
Other manufacturers design concepts are different and they come as one piece with the toner cartridge.
After the new DR-2425 drum is inserted in the Brother printer, the counter needs to be reset.
It is an easy process in five steps. Follow the steps as shown below and this will stop the drum reminder and reset the drum counter.
Imaging drums show all particles that stick to the cylinder, so ensure that you change the drum regularly, usually about every four toner cartridges. Imaging Drums also have filters and wipers that collect the excess toner. By replacing the drum you are actually cleaning up the printers workspace as well.
The final result will be a fresh clean image of print.
- MFC-L2730DW DRUM reset
- When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- Make sure the machine is turned ON.
- Close the front cover.
- Press
(Cancel). - Press and hold
Toner (The toner ICON is on the bottom right hand side of the LED screen.) for FIVE seconds or until the screen changes. - Reset Drum will appear in the LED Screen
- Tap Drum, and then press Yes.
Sometimes you may need a new toner cartridge TN2450 and its always best to keep one on hand when the old one runs out.